SPICER        
28 ft 1981 Bristol Channel Cutter

This Sam Morse Bristol Channel Cutter was very well crafted by her first owner / builder. It features an open and efficiently laid out interior for live aboard along with good stowage spaces.




Basic Details

  • Make: Bristol Channel Cutter
  • Length: 28 ft
  • Price: $ 60,000
  • Year: 1981
  • Condition: Used
  • Location: Port Townsend, WA, USA
  • Boat Name: Spicer
  • Hull Material: Fiberglass
  • Fuel Type: Diesel
  • Number: 5406082

Dimensions
  • LOD 28'
  • LWL 26' 3"
  • Beam 10'1"
  • Draft 4'10"
  • Bridge clearance 48'
  • Displacement 14,000 pounds
  • Ballast 4,600 pounds

Engine and Fuel System
  • Sabb 18 hp rebuilt in 2006
  • variable pitch propeller 18" two bladed
  • 1" propeller shaft
  • 32 gallon aluminum tank gravity supply with drain at the bottom
  • Racor filter 500FG with second filter on engine
  • 120A alternator

Sails and Deck Hardware
  • Total sail area 680 sq ft
  • Jib about 100% on Profurl roller furler
  • Storm Jib
  • A-symmetrical spinnaker
  • Genoa
  • All winches are bronze and include Lewmar 46 self-tailers for the jib, two staysail winches on the cabin top, halyard winches on the mast.
  • All standing rigging is 9/32
  • Plath Bronze manual windlass
  • #45 CQR with 280ft. 5/16 high tensile chain
  • 300ft. 3 strand rode
  • 45 pound Luke stored
  • 25 pound Luke with 90 ft. chain plus 200 ft. flat braided line
  • Avon dinghy

Electronics
  • Radar Raytheon SL70
  • GPS Furuno GP 50 Mark 3
  • Icom IC-M45 SSB radio with insulated backstay and copper grounding
  • B&G Speed and Depth
  • Raytheon ST4000 Tiller Pilot

Joinery work
The joinery work is spectacular. Dovetail hatches and drawers and dorade boxes. Honey locust counter tops. Alaska Yellow Cedar ceiling. Teak bulwarks. Teak and Holly sole.


Systems
  • Two Stainless Steel water tanks 55 gallons
  • Hot and cold running water
  • 110 VAC hot water tank and engine heat
  • Luke propane stove with oven
  • 12V refrigeration
  • Engine driven water maker
  • Manual bilge pump
  • Two battery banks
  • Battery charger
  • Water maker
  • Rule 3700 electrical bilge pump
  • Webasto airtop diesel heater
  • Head
  • Nice music system
  • Neatly organized electrical system using ABYC standards
  • All underwater metals are bonded


cape george cutter for sale
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
cape george cutters
For Additional Information
and to schedule a showing contact
Yacht Sales

Currently Located in Port Townsend, WA
Listing price = $60,000